Panasonic KX-TDA15 Features Manual page 160

1.11 Transferring Features
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
• One-touch Transfer
One-touch Transfer can be performed by pressing a One-touch Dialling button that has been assigned
the TRANSFER command and the telephone number of the transfer destination. This is useful for
transferring calls to an outside destination. (→ 1.6.1 Memory Dialling Features)
• Automatic Transfer by DSS Button
Pressing a DSS button during a conversation with an extension or outside party can automatically
transfer the call to the specified destination. It is possible through system programming to prevent this
feature operating for extension to extension calls.
• When transferring a call from an analogue trunk, users are strongly recommended to perform a
screened transfer, so that the outside caller is not automatically connected to an extension using
Hands-free Answerback when the extension user is absent.
Programming Manual References
PC Programming Manual
3.8.3 [2-2] Operator & BGM—BGM and Music on Hold—Sound on Transfer
3.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Recall—Transfer Recall
3.8.11 [2-7-1] Class of Service—COS Settings—TRS—Transfer to CO
3.8.17 [2-9] System Options—Option 4
→ DSS Key—Automatic Transfer for Extension Call
→ Transfer—Transfer to Busy Extension without BSS Operation
3.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Transfer Recall Destination
3.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Transfer Recall Destination
PT Programming Manual
[201] Transfer Recall Time
[503] Call Transfer to Trunk
[712] Music for Transfer
Feature Guide References
2.2.1 Class of Service (COS)
User Manual References
1.4.1 Transferring a Call (Call Transfer)
160 Feature Guide
Destination Availability