1
Page2-4 : Bottom Panel Check
A
Calibration check mode for the bottom panel
B
C
Page3 : System Setting
PAL/NTSC setting mode
D
E
F
32
1
2
Check the result of the calibration.
Touch the center of
When the calibration has finished successfully, the color of
from blue to white.
SAVE: To store the calibration settings of the bottom panel.
CANCEL: To cancel the calibration settings of the bottom panel.
Perform the factory presetting of the video system.
Set it to the corresponding system for the destination area.
Move the cursor with the k (left) or l (right) key to the desired setting
then press the SAVE button.
PAL
To set the video system to PAL.
NTSC (7.5IRE)
To set the video system to NTSC (7.5IRE).
NTSC (0IRE)
To set the video system to NTSC (0IRE).
The settings for each destination are shown below:
Destination
North America
/KUCXJ
Europe
/WYXJ5
Japan
/JJXJ
China
/WAXJ5
General
/TLXJ
SVM-1000
2
3
with a pointed tool, such as a stylus pen.
Video Format
NTSC (7.5IRE)
PAL
NTSC (0IRE)
PAL
NTSC (0IRE)
3
4
changes
4