5. OEMSE Commands
5.10. OEMSEAddARPTableEntry
Command
OEMSEAddARPTableEntry
Description
This command will add an entry into the ARP table of the BladeEngine iSCSI Initiator.
Syntax
OEMSEAddARPTableEntry [common_options] -OEMSEparams IPAddress="< value
>",MACAddress="< value >" [SM-CLP-target]
Options
[common_options]
Parameter
Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
-
takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams
of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter
Data
Name
Type
IPAddress
ipaddress
MACAddress
string
Optional Parameters
None
Possible Error Messages
Common Error Messages
Invalid value,
Min
Max
Default
0
16
0.0.0.0
00-00-00-00-
17
17
00-00
5.10. OEMSEAddARPTableEntry
Description
IP address of the entry to be added to the
ARP table.
The MAC address of the entry to be
added to the ARP table.
40