The WLAN wizard helps you find and connect to a wireless
LAN (WLAN). When you open the application, your device
starts to scan for available WLANs and lists them.
Select
Options
and from the following:
Refresh
— Update the list of available WLANs.
●
Filter WLAN networks
●
found networks. The selected networks are filtered out the
next time the application searches for WLANs.
Start web browsing
●
access point of the WLAN.
Cont.web browsing
●
currently active WLAN connection.
Disconnect WLAN
— Disconnect the active connection to
●
the WLAN.
Details
— View the details of the WLAN.
●
Important: Always enable one of the available
encryption methods to increase the security of your wireless
Green tips
Here are tips on how you can contribute to
protecting the environment.
Save energy
When you have fully charged the battery and disconnected
the charger from the device, unplug the charger from the wall
outlet.
© 2009 Nokia. All rights reserved.
— Filter out WLANs in the list of
— Start browsing the web using the
— Continue web browsing using the
LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
To set the WLAN wizard to automatically create an access
point for the selected WLAN when you select
browsing
or
Use
for, select
Connection
Wireless LAN
>
test
Run
automatically. The access point can also be used
>
with other applications requiring a WLAN connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
To use the found WLAN for a net call connection, select the
row showing the status,
and the WLAN to be used.
You do not need to charge your battery so often if you do the
following:
● Close and disable applications, services, and connections
when not in use.
● Decrease the brightness of the screen.
● Set the device to enter the power saver mode after the
minimum period of inactivity, if available in your device.
● Disable unnecessary sounds, such as keypad and ringing
tones.
Start web
Settings
> Settings, and
>
Internet connectivity
>
Use
for, the desired net call service,
71