Basic steps for accessing and using WAP services
1. Save the service settings that are needed to access the WAP service that you want to use. See
Setting up the phone for a WAP service below and Appearance settings of the WAP browser on
page 96.
2. Make a connection to the given WAP service. See Making a connection to a WAP service on
page 93.
3. Start browsing the pages of the WAP service. See Browsing the pages of a WAP service on page 94.
4. Once you are done with browsing, end the connection to the WAP service. See Ending a WAP
connection on page 96.
Setting up the phone for a WAP service
You may receive the service settings as a text message from the network operator or service provider
that offers the WAP service that you want to use. For more information, contact your network operator
or service provider, or visit Club Nokia's Web site (www.club.nokia.com).
You can also key in the settings manually. For appropriate settings, contact your network operator or
service provider. The WAP settings may be available, for example, on the Web site of the network
operator or service provider.
Saving the service settings received as a text message
When you receive the service settings as a text message,
• To save and activate the received settings, press
If no settings are saved in
connection set and activated.
90
Copyright © 2002 Nokia. All rights reserved.
Active service
settings, the settings are saved under the first available
Service settings received
Options
and select Save.
is displayed.