2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA600
2.11.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
Programming References
PC Programming Manual
2.7.24 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)—For Output (EIO)—Device Type
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—Doorphone—Open Duration
2.8.8 [2-6-1] Numbering Plan—Main—Features—Door Open
2.8.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Door Unlock
PT Programming Manual
[207] Door Open Duration
[512] Permission for Door Open Access
Feature Manual References
1.3.19 COS (Class of Service)
Operating Manual References
1.3.20 Door Open
1.4.11 Doorphone Call
Description
A visitor can use a doorphone to call its preprogrammed destination. Extension users can call a doorphone.
Conditions
•
Hardware Requirement:
KX-TDA50: An optional doorphone and a DPH card
KX-TDA100/KX-TDA200/KX-TDA600: An optional doorphone, the OPB card and DPH card
•
Call Destination
The destination of doorphone calls can be assigned to each doorphone port for each time mode. The
Time Table is determined by the tenant number assigned to each doorphone port. (→ 1.17.5 Time
Service)
The following destinations cannot be the destination for doorphone calls:
–
Floating Extension no. for SVM
–
DISA
–
Analog/ISDN Remote Maintenance
•
Class of Service (COS) programming determines the doorphone ports that are able to make an
outgoing CO line call.
•
Internal Call Block determines which extensions can call a doorphone. (→ 1.9.14 Internal Call Block)
1.4 D
Feature Manual
87