Table of Contents
Advertisement
OR
Press Search to recall the number from the phone book.
Press the
4
Send
To end the call, press the
5
This action disconnects both parties.
End calls
To end a conference call, that is, to disconnect with all callers, press the
press
>
Options
Disconnect one party
If you wish to disconnect with the first party and remain connected to the second
party, have the first party terminate the call on his/her end.
• SEND OWN CALLER ID WHEN CALLING
This feature allows you to block caller ID when you call someone (your number will
not be displayed on their caller ID). This feature may only be effective when calling
a number equipped with caller ID.
Note:
This feature is available only when supported by the wireless network and may
not function if you are roaming.
Important:
each time you want to block the sending of your own number to the caller ID.
Store feature codes
Before you can use the
feature codes for activating this feature. Once the code is stored in your phone, it
is sent automatically to the network when you select this option from your phone
menu.
Press
>
1
Menu
The Feature code field appears after a few seconds.
Enter the feature code your service provider gave you (for example, *67 for
2
activating
Send own caller ID when calling
Scroll to
3
Send own caller ID when calling
Select
to assign the activation code.
4
No
Place a call without sending your number
Press
>
1
Menu
Scroll to
, and press
2
No
Enter the desired phone number, and press
3
key again to connect both parties.
key.
End
.
End all calls
This feature works on a call-by-call basis. You must enable this feature
Send own caller ID when calling
>
Settings
Network services
>
Settings
Network services
.
Select
feature, you must store the
>
Network feature setting
), and press
OK
and press
Select
>
Send own caller ID when calling
.
OK
[ 53 ]
Advanced features
key, or
End
.
.
.
.
Advertisement
Table of Contents
