Page 1
INSTRUCTION MANUAL Power Scraper HK1800 HK1810 002873 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model HK1800 HK1810 Blows per minute 3200 min 0 - 3,200 min Overall length 315 mm 315 mm Net weight 3.3 kg 3.2 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
Page 3
10. Use of power supply via a RCD with a rated 21. Store idle power tools out of the reach of residual current of 30mA or less is always children and do not allow persons unfamiliar recommended. with the power tool or these instructions to Personal safety operate the power tool.
In cold weather or when the tool has not been CAUTION: used for a long time, let the tool warm up for a Before plugging in the tool, always check to see • while by operating it under no load. This will that the switch trigger actuates properly and loosen up the lubrication.
Both carbon and unplug the tool. brushes should be replaced at the same time. Use only Remove the crank cap using a Makita lock nut wrench identical carbon brushes. 28 (optional accessory). Rest the tool on the table with Use a screwdriver to remove the rear cover.
Page 6
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Bull point • Scaling chisel • Scraper assembly •...