Electrolux EPI09LEIW User Manual page 7

Explanation of buttons
No. Button
ON/OFF
MODE
FAN
UP ^
DOWN v
LED
TURBO
TIMER ON Press this button to initiate the auto-on time sequence. Each
Explanation
Press the button to switch on the unit. Press the button again
to switch off the unit.
Press the button to set the operation mode: AUTO, COOL,
DRY, HEAT and FAN. Default setting: AUTO.
In the AUTO mode, the initial value is 24 °C.
Press the button to set the fan speed: AUTO, LOW, MEDIUM
and HIGH. Default setting: AUTO. In the DRY mode, only
LOW can be set.
Press the button to increase the temperature. Each press will
increase the setting temperature 1 °C increments. Release
the button to set the temperature and send the order, then
the setting temperature will be displayed constantly.
Temperature range: 17-30 °C.
In FAN mode, the temperature cannot be set.
Press the button to increase the temperature. Each press will
increase the setting temperature 1 °C increments. Release
the button to set the temperature and send the order, then
the setting temperature will be displayed constantly.
Temperature range: 17-30 °C.
In FAN mode, the temperature cannot be set.
Press the button to switch the display of the indoor unit on or
off. Default setting: OFF.
In COOL or HEAT mode, press the button to enable or
disable the turbo function. If the turbo function is enabled, the
turbo symbol will be shown. Default setting: OFF.
If the turbo function is enabled, the unit will operate at turbo
speed to cool or heat rapidly so that the ambient temperature
approaches the set temperature as soon as possible.
If the operation mode or the fan speed is changed, the turbo
function will be canceled.
press will increase the auto-timed setting in 30 minutes
increments. When the setting time displays 10, each press
will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on
time to 0.0.
ENGLISH 6