Scan To The Internal Hard Disk Drive - Panasonic DP-C406 Operating Instructions Manual

Scan to the Internal Hard Disk Drive

The scanned image can be saved to the internal Hard Disk Drive, and the saved data can be retrieved
using a computer via a network.
The Hard Disk Drive is enabled with 12 image boxes. For instructions on how to change the image box name,
refer to Editing Image Box Name (see page 69).
All data saved on the Hard Disk Drive can be deleted with the scanner function. For more details, refer to
Scanner Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
When the image data is stored in the Hard Disk Drive, the Scan/Email memory indication does not go below
1%.
The scanned image(s) cannot be saved to the internal Hard Disk Drive if the setting of Function Parameter "02
Scan to HD Function" (Scanner Settings > Key Operator Mode) is set to "No".
For more details on this setting, refer to Scanner Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
1
Place original(s).
For details on how to place originals, refer to
Placing Originals (see page 6) and Basic
Operation Procedure (see page 9).
2
Press the Scan/Email key.
Hard Disk Drive
3
Select "Basic Menu" to configure the
required settings, and then select
"OK".
Refer to Scanner Settings (See pages 45
to 63).
19