Server - Panasonic BB-HCM311A Operating Instructions Manual

Operating Instructions (Additional Features)
Setting
Enable Post-
trigger Image
Buffer
8.
Select the transfer method, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Note
If you transfer image by E-mail or FTP, confirm that the default gateway and
DNS server addresses are assigned correctly.
Setting
No Transfer, No
Memory
Overwrite
No Transfer,
Memory
Overwrite
FTP
E-mail
22
• Check the box to enable the setting. The camera buffers or
transfers the image right after the alarm signal is detected.
• Set an interval, number of images to buffer and total
number. The buffered images may not match the total
number due to memory capacity, image resolution, image
quality or what object you view.
• If the internal memory is full, the camera stops the buffer.
• If the internal memory is full, the camera deletes the old
images, and continues to buffer the image.
• The camera transfers the image to an FTP server (see
page 23).
• The camera transfers the image by E-mail (see page 25).
Description
Description