Bosch MIC612 Operation Manual page 41

MIC612 Thermal Camera
Preset Command
94-PRESET
95-PRESET
96-PRESET
97-PRESET
98-PRESET
99-PRESET
Notice!
Some Pelco controllers do not support all of the preset command numbers. Refer to the
documentation of the specific Pelco controller for supported preset commands.
Bosch Security Systems
Description
Initiates a Preset Tour.
Enables or disables Limit Stops in the Setup Menu for AutoScan.
Invokes the Pelco main Setup Menu when pressed for 2 seconds.
Stops a scan.
Initiates FastAddress (Pelco Random Scan).
Toggles the Synch. Mode between Line Lock and Internal (Pelco
Frame Scan). This command is available only for two (2) minutes after
the power is applied and then reverts to normal preset functionality.
Starts an AutoScan.
Operation Manual
Controlling the Camera | en
2016.03 | 2.2 | F.01U.249.416
41