4
4
When the level indication lamp
glows, apply the guard closely
against the skin and keep it
pressed until flashes.
When the appliance beeps, press the
head perpendicularly against the skin.
• Use the appliance after checking that
there are no other people nearby.
• Points for IPL hair removal (See this
page.)
• When the appliance beeps,
preparation for flash is complete.
5
5
Press
to turn the power off.
Points for proper IPL hair removal
Point 1
Apply the guard perpendicularly against
the skin and keep it pressed against the
skin.
The flash window will not flash unless it is
applied perpendicularly to the skin.
Point 2
The size of the guard (part with grid
pattern) is a guide for the IPL hair
removal range of each flash.
: IPL hair removal range of each
flash
• When the appliance beeps, preparation
for flash is complete.
Continuous flashes
After one flash, slide the appliance to the next flash area while it
is still pressed against the skin. Up to 10 continuous flashes at
an interval of approximately 3 seconds is possible.
90°
• The flash window will no longer flash after 10 flashes. Remove
the appliance from the skin and try again.
• Do not use the appliance continuously on the same area.
13