GE JSP28 Use & Care Manual page 25

Table of Contents

Advertisement

You may notice some white ash in the oven. Just wipe
it up with a damp cloth after the oven cools.
vinegar and water mixture. These deposits are usually
a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
NOTE: No
functions can be programmed
door automatically unlocks.
How
to Set Delay Start of Cleaning
Quick Reminder:
1. Press the CLEAN pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
4. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
C L E A N
1. Follow the steps in the Before a Clean Cycle
section.
2,
Press the CLEAN pad.
Press the INCREASE or DECREASE
A 3
pad to enter Clean Time.
"
S T O P T I M E
4.
Press the STOP TIME pad. "STOP
TIME" and the earliest Stop Time you
can set will appear in the display.
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If the
Clean Time is three hours and the time of day is 6:00,
the Stop Time that appears in the display will be 9:00.
before the
5. Press the INCREASE pad to change the Stop Time
to a later time of day if desired. For example: If
you set Stop Time at 11 :00, oven will start clean
cycle at 8:00 and end at 11 :00. The door latches
automatically.
The self-clean cycle will automatically begin after
"CLEAN" is displayed and the time for clean cycle
is set. The words "ON" and "LOCK" will appear in
the display. It will not be possible to open the oven
door until the temperature drops below the lock
temperature and the LOCK light goes off.
6. When the LOCK light is off, open the door.
NOTE:
During a delayed self-clean operation you can find
when the oven is set to turn on by pressing and
out
holding the CLEAN pad for 3 seconds.
A fan may automatically turn on and off to cool
internal parts. This is normal, and the fan may
continue to run after the oven is turned off.
(continued ne.rt page)
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jsp26Jsp31

Table of Contents