Panasonic DBS Section 540 Reference Manual page 89

Programming
Parameter
Description
Address
Options
Notes
Parameter
Description
Address
Options
DBS-2.3/9.2-540
Add One Digit (Future Use)
Add the leading node number to a call received over a
network trunk group trunk. This is used when connecting to
a non-DBS PBX.
FF1 8# 4# 8# 3# (NWG)# 5# (0/1)#
0=No node number added
1=Add the node number to beginning of the digits received.
It is preferable that the non-DBS PBX dial the node number
if possible. This allows calls throughout the network.
T1 Networking Flash Key Operation
Determines if a flash key press during a network call results
in a hookflash or release and reseizeT1 line.
FF1 8# 4# 8# 3# (NWG)# 6# (0/1)#
0=Release and Reseize
1=Hookflash
T1 Networking - Revised April 2000
T1 Settings Added for Networking
Page 89