Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use a to select Function and then press
➡
c (Select).
Use j to select Sound/Vib/Lamp and then
➡
press c (Select).
Use j to select Incoming Setup and then press
➡
c (Select).
Use j to select Incoming Call and then press
➡
c (Select).
Use j to select
➡
then press c (Select).
Use j to adjust the volume and then press
➡
c (Set).
Each press of j changes the volume one step.
•
STEP ↑
The ring tone volume gradually increases.
STEP ↓
The ring tone volume gradually decreases.
Level5
↑
Level3
The ring tone sounds at the set volume.
↓
Level1
The ring tone does not sound.
OFF
Press % (OK).
➡
(Ringtone Volume) and
Turning On/Off the Answer Memo
When the standby screen is displayed, press c.
Use a to select Tool and then press
➡
c (Select).
Use j to select Memo Menu and then press
➡
c (Select).
Use j to select Answer Memo and then press
➡
c (Select).
Use j to select Set Answer Memo and then
➡
press c (Select).
Use j to select ON or OFF and then press
➡
c (Set).
The answer memo is turned on and
ON
displayed on the standby screen.
The answer memo is turned off and
OFF
disappears from the standby screen.
•
The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
Answer memo is a function that automatically answers
•
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
is
19