Table of Contents
Advertisement
Online Programming
To make online setting, select "9 ONLINE SETTING" in the PGM2 MODE window.
NOTE
For more information, please consult your authorized SHARP dealer.
1.
In the PGM2 MODE window, select "9 ONLINE SETTING".
• The ONLINE SETTING window will appear.
2.
Program each item as follows:
• TERMINAL No. (Use the numeric entry)
Terminal number (max. 6 digits)
• CI SIGNAL (Use the selective entry)
Sensing of the CI signal
• SENSING
• NON
• LINE FORM (Use the selective entry)
HALF: Half duplex
FULL: Full duplex
• BAUD RATE (Use the selective entry)
38400 bps
19200 bps
9600 bps
4800 bps
2400 bps
1200 bps (not applicable for channel #2)
300 bps (not applicable for channel #2)
• START CODE (Use the numeric entry)
Start code (0 to 127)
• END CODE (Use the numeric entry)
End code (0 to 127)
• TIME OUT (Use the numeric entry)
Time out time (1 to 255 sec.)
• AT OPEN STORE (Use the character entry)
AT command with open store (max. 50 characters)
• AT CLOSE STORE (Use the character entry)
AT command with close store (max. 50 characters)
185
Advertisement
Table of Contents
