2. Apply the adhesive seal around the edge of the hob ensuring that the ends do not over
lap or leave a space. (Fig. 4.3).
3. Place the hob in the work top cut out
and secure it in position by using the
brackets as indicated in Fig. 4.4 (3 cm
work top) or Fig. 4.5 - (4 cm work top).
Fig. 4.4
Adhesive
side
NOTE: A partition should be fitted a mini-
mum of 4 cm below the base of the hob
if the cupboard is to be used for storage.
Never place perishable foods in the cup-
board below the hob.
Fig. 4.5
Fig. 4.3
17