Contents 1 Important Safety Notice 2 Your CD Soundmachine Introduction What's in the box Overview of the main unit 3 Get started Connect power Turn on Turn off 4 Play Play a CD Play from USB devices Tune to FM radio stations Play from Bluetooth-enabled devices Play from an external device 5 Play options...
1 Important • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Safety • The unit shall not be exposed to dripping or splashing.
WOOX Innovation declares that this product is compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. You can find the Declaration of Conformity on www.philips.com/support. The making of unauthorized copies of copy- protected material, including computer programs, files, broadcasts and sound...
2 Your CD Soundmachine Introduction With this CD Soundmachine, you can: • Listen to FM radio; • Enjoy audio from discs, USB device, Bluetooth devices, and other external audio devices; • Program the play sequence of tracks. What's in the box Check and identify the contents of the package: •...
Overview of the main unit CD/USB BT FM OFF a CD/USB source selector • Press to select CD or USB source. • Skip to the previous or next track. • Search within a track. • Stop playing. e OPEN•CLOSE • Open or close the disc compartment. c - ALBUM + • Skip to the previous or next album.
Page 8
f Bluetooth indicator • Indicate the status of Bluetooth connection. /PAIRING • Start or pause play. • Press to wake up the unit from standby mode. • Press and hold to disconnect the connected Bluetooth device and enter pairing mode. h PROG • Program the play sequence of tracks.
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The Option 2: Battery power model number and serial number are on the bottom of your apparatus.
Turn on Switch the source selector to CD/USB/BT/FM. Switch to standby mode • The product switches to standby mode automatically when there is no audio detected for over 15 minutes. • Press to wake up the product from standby mode. Turn off Switch the source selector on the product to OFF.
4 Play Play a CD CD/USB BT FM OFF Note • You cannot play CDs encoded with copyright protection technologies. • When an audio-in cable is plugged, CD/USB playback stops, and the unit switches to audio in mode automatically. Play from USB devices You can play commercially available audio CDs: •...
» The bluetooth indicator flashes blue. On your Bluetooth device, enable Bluetooth and search for Bluetooth devices (refer to the user manual of the device). Select [Philips AZ330T] on your device for pairing. If necessary, enter default password “0000”. » After successful pairing and connection, the product beeps twice, and the LED indicator turns solid blue.
Connect another Bluetooth-enabled device Disable Bluetooth on the current device, and then connect another device. Play from an external device You can also listen to an external audio device through this unit. Switch the source selector to CD/ USB/BT/FM. Connect an audio cable (3.5mm, not supplied) to: • the AUDIO-IN socket on the unit.
5 Play options Program tracks In CD and USB mode, you can program a maximum of 20 tracks. Press to stop playback. Control play Press PROG to activate the program mode. In CD and USB mode, you can control play »...
6 Product Tuner information Tuning Range FM: 87.5 - 108MHz Sensitivity: Mono, 26dB S/N Ratio <22 dBf Stereo, 46dB S/N Ratio <43 dBf Note Total Harmonic <3% Distortion • Product information is subject to change without prior Signal to Noise Ratio >50 dBA notice.
FAT16, FAT32 (sector size: 512 bytes) accumulate at the disc lens. To ensure good • MP3 bit rate (data rate): 32-320 Kbps play quality, clean the disc lens with Philips and variable bit rate CD lens cleaner or any commercially • Directory nesting up to a maximum of available cleaner.
Refer to the user manual of the requesting service. If the problem remains device for how to enable the function. unsolved, go to the Philips Web page (www. • This product is already connected with philips.com/support). When you contact Philips, another Bluetooth-enabled device.