GE 20 Series Owner's Manual & Installation Instructions page 18

REVERSING THE DOOR SWING
TRANSFER BOTTOM HINGE
5
BRACKET TO THE LEFT
Remove the base grille by pulling it straight out.
Remove the screw attaching the hinge pin to the right
side of the hinge bracket. Attach the hinge pin to the
left side of the bracket.
Remove the bottom hinge bracket from the right side
and install it on the left side.
TRANSFER REFRIGERATOR
6
DOOR HANDLE TO THE RIGHT
Remove the plug button, located on the lower part
of the handle, by carefully prying under the edge with
a putty knife. Remove the exposed screw holding
the handle.
Remove the two screws holding the handle to the
top of the door.
Installation Instructions
Handle Plug
(CONT.)
TRANSFER REFRIGERATOR DOOR
6
HANDLE TO THE RIGHT
Move the screws from the top right side of the door
top and insert them into the handle screw holes on
the opposite side.
Move the large plug button from the left edge of the
door and insert it into the hole on the opposite side.
Plug Button
Transfer the door plug button to the opposite side.
Attach the handle to the right side of the door.
Handle Plug
18
(CONT.)
Screws
Button