Table of Contents
Advertisement
C. Reattach the control PWB and the right rear
cabinet.
• If the fax box unit is installed, carry out steps 1), 2), and 3)
additionally.
1)
Connect the interface cable to the control PWB unit.
2)
Push the interface cable into the recessed portion of the sheet
metal on the control PWB unit.
3)
Attach the snap band to the sheet metal of the control PWB
unit.
4)
Push the control PWB unit into the main unit.
5)
Secure the unit with the two screws.
6)
Fit the interface cable into the right rear cabinet cover.
7)
Attach the right rear cabinet cover to the main unit.
At this time, check that the four hooks are properly fitted to the
main unit.
8)
Secure the right rear cabinet with the screw.
Hook 1 Hook 2
7
8
Hook 3
Hook 4
6
MX-5111N MX-EB11 (ENHANCED COMPRESSION KIT) 24 – 2
9)
Attach the ozone filter cover to the main unit.
• Reconnect the cables that have been removed in step A to the
original positions of the control PWB unit.
D. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
E. Confirmation of connection
1)
Execute SIM22-10 to check to confirm that the combined
machine recognizes the MX-EB11.
Hide quick links:
Advertisement
Table of Contents
