English (original instructions) English ROUTER DW624, DW625E Congratulations! with different accessories or poorly maintained, the vibration emission may You have chosen a D WALT tool. Years of differ. This may significantly increase the experience, thorough product development and exposure level over the total working...
Power tool plugs must match the outlet. Never modify the plug in any way. Do ROUTER not use any adapter plugs with earthed DW624, DW625E (grounded) power tools. Unmodified plugs WALT declares that these products described and matching outlets will reduce risk of under Technical Data are in compliance with: electric shock.
Page 10
English wrench or a key left attached to a rotating operations different from those intended part of the power tool may result in personal could result in a hazardous situation. injury. 5) SERVICE Do not overreach. Keep proper Have your power tool serviced by a footing and balance at all times.
English Residual Risks f. Guide rods for parallel fence g. Threaded spindle In spite of the application of the relevant safety regulations and the implementation of safety h. Stop devices, certain residual risks cannot be avoided. i. Knurled nut These are: j.
English Replacing the Collet (fig. 3) WARNING: 115 V units have to be operated via a fail-safe isolating Your router is supplied with a 1/2" collet fitted to the transformer with an earth screen tool. Other precision collets are also available to suit between the primary and secondary the cutter used.
English Triple Depth Adjustment Using the 4. Position the router on the cutting line. Revolver Depth Stop (fig. 5) 5. Slide the parallel fence (s) against the workpiece and tighten the locking bolts (e). The revolver depth stop (t) can be used to set three 6.
English Freehand Routing WARNING: To reduce the risk of injury, turn unit off and disconnect Your router can also be used without any sort of machine from power source before guide, e.g. for signwriting or creative work. installing and removing accessories, before adjusting or changing set- WARNING: Make shallow cuts only! ups or when making repairs.
English soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...