Blind Transfer (Refer); Attended Transfer (Refer) - Panasonic KX-NCP500 Programming Manual

3.1.13 Supplementary Service
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
CLIR
Specifies whether to allow restriction of the display of the CLIP number on the called party's telephone when
making a SIP CO line call.
Default
Yes
Value Range
Yes, No
CNIP (Send)
Specifies whether to send the caller's name to be displayed on the called party's telephone when making a
SIP CO line call.
Default
Yes
Value Range
Yes, No
CNIP (Receive)
Specifies whether to receive the caller's name to be displayed on the called party's telephone when receiving
a SIP CO line call.
Default
No
Value Range
Yes, No

Blind Transfer (REFER)

Specifies whether to allow blind transfers using REFER.
Default
No
Value Range
Yes, No

Attended Transfer (REFER)

Specifies whether to allow attended transfers using REFER.
48 Programming Manual for Virtual SIP CO Line Card Document Version 2011-10