Electrolux 6000 series Service Manual page 81

and a slot in the groove and an arrow at the top of
the bellows.
3. Place the slot over the tab and while holding the
bellows in place with one hand, place the other hand
inside the bellows and force the groove of the bellows
over the lip of the tub with your thumb.
4. Work your way about one third way around the tub,
then pull in on the inside flap of the bellows to seat
the bellows into the lip of the tub.
5. Using your thumb, start on the other side of the top
tab and force the bellows on in the other direction.
Again about one third of the way around stop and
seat the bellows onto the tub lip. Force the remaining
bellows on with your thumb and seat it.
6. To install the spring, fold the front of the bellows
back into the tub.
81