Panasonic UF-580 Service Manual page 260

No. Parameter
18 OPERATOR CALL
TIMER
19
OGM LENGTH
(TAM I/F)
20 SILENT DETECTION
(TAM I/F)
22 SUBSTITUTE RCV
23 RECORDING PAPER
SIZE
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
27 POLLED FILE SAVE
28 STAMP AT MEM. XMT
31 INCOMPLETE FILE
SAVE
32 COPY REDUCTION
Setting
Setting
Number
*1 20
sec.
2 30
sec.
3 40
sec.
4 50
sec.
1 1
sec.
--- ---
60 60
sec.
1 Invalid
*2 Valid
1 Invalid
*2 Valid
1 A4
*2 Letter
3 Legal
1 Fixed
*2 Auto
70 70%
---- ----
*100 100%
(----)
*1 Invalid
2 Valid
1 Invalid
*2 Valid
*1 Invalid
2 Valid
1 Manual
*2 Auto
260
Comments
Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
mode.
Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
until the time setting has lapsed.
(Default = 20 sec.)
Selecting the Silent Detection Mode.
Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper
is jammed.
Setting the recording paper size installed in your machine.
Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction is
selected on Fax Parameter No. 24.
Setting a 4-digit password for secured polling.
Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual : The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.