Network Features
Selective Reception
General Description
Your machine has a special feature known as Selective Reception which can prevent receipt of
unnecessary documents (
Before receiving the document, the last 4 digits of the ID Number received from the sending machine will be
compared with the last 4 digits of the telephone number programmed in each One-Touch or Abbreviated
station. When a match is found, your machine will start receiving the document. If a match is not found, your
machine will cancel the reception and an Information Code 406 will be recorded on the Journal.
Setting the Selective Reception
1
2
3
4
5
NOTE
Downloaded From ManualsPrinter.com Manuals
Ex:
junk fax, direct mail, etc.).
7
4
6
4
2
1. When the Selective Reception is set, your machine can receive only from those stations which
are programmed in the built-in auto-dialler.
2. If your ID number has not been set, your machine might not be able to receive from some
models.
To set your ID number, see page 29.
SET MODE
(1-8)
∨ ∧
ENTER NO. OR
FAX PARAMETER(1-137)
NO.=
46 SELECT RCV
1:INVALID
46 SELECT RCV
2:VALID
109