Panasonic KX-TDA200 Programming Manual page 210

3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
Status
Indicates the status of the option card in each slot (reference only).
This column offers two ways to open the screen to select the card command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card has been removed from the sub-slot, or is not communicating with the PBX.
Pre-Install: There is no card in the sub-slot, but the card type is programmed for the sub-slot.
Idle: There is no card in the sub-slot, no programming of the card type for the sub-slot.
Maintenance Console Location
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.28 [1-1] Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
Port Number
Indicates the port number of the mounted option card (reference only).
Default
Current port number
Value Range
Port number
Maintenance Console Location
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
210 PC Programming Manual Document Version 2008-11