Canon MAXIFY GX2070 Installing

以下步驟及畫面僅供參考，實際操作畫面可能因裝置型號、系統或軟件版本而有所不同。
The following steps and screens are for reference only, and the actual operation screens may vary depending on
the device model, system, or software version.
有線連接 Wired Connection
需要乙太網路電纜線(另行出售)。
1.
You will need an Ethernet cable (sold separately).
確保在開始有線連接設定之前，印表機已開啟。
2.
如果電源開啟，請輕觸觸控式螢幕(A)以顯示以下螢幕(A)。
Make sure printer is turned on before starting wired connection setup.
If the power is on, touch the touch screen (A) to display the screen (A).
從印表機後部左側取下連接埠的蓋(B)。
3.
Remove the Cap (B) from the port located on the left side at the back of the printer.
在 Mac OS 以有線 LAN 方式安裝及連接 MAXIFY GX2070 打印機
Installing MAXIFY GX2070 on Mac OS via wired LAN connection
1