Instrument and control functions
5. Insert the projection on the front of
the rider seat into seat holder A as
shown.
3
4
1. Projection
2. Rider seat holder cover
3. Seat holder A (for low position)
6. Align the projection on the bottom
of the rider seat with the "L" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
1. "L" position slot
7. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
2
1
Storage compartments
This vehicle is equipped with two stor-
age compartments.
Storage compartment A is located un-
der the rider seat. (See page 4-30.)
1. Storage compartment A
Storage compartment B is located un-
der the passenger seat. (See page
4-30.)
2
3
1
1. Storage compartment B
2. Protective cover
3. Inertial measurement unit (IMU)
NOTICE
The IMU is not user serviceable and
very sensitive, so we advise against
removing the protective cover, plac-
ing any foreign materials near the
IMU, or handling the IMU directly.
Do not move or remount the
IMU to a different location.
4-33
EAU73350
1
2
ECA23290