Instrument and control functions
Rider seat
To remove the rider seat
1. Remove the passenger seat. (See
page 6-41.)
2. Lift the seat rearward and up to re-
move it.
6
To install the rider seat
1. Insert the projections on the front
of the rider seat into the seat hold-
er and the projections on the rear
of the rider seat into the hole on
the frame cross member as
shown. Place the rider seat in the
original position.
2 2
1
1
1. Projection
2. Seat holder
3. Hole
2. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
6-42
Rider footrest position
1
1
The rider footrests can be adjusted to
one of two positions. From the factory,
the footrests are in the low position.
Have a Yamaha dealer adjust the posi-
tions of the rider footrests.
3
3
EAU91560