When Memory Is Full - Ricoh MP 2001L Operating Instructions Manual

3. Troubleshooting
Problem
Copies are not in correct order.
Duplex
Problem
Order of copies is not correct.
In Duplex Margin mode, parts
of the original image are not
copied.
When using Duplex, copy is
made Top to Top even though
Top to Bottom is selected.

When Memory Is Full

Messages
"Memory is full. [Print] scanned
orig., [Clear] to cancel/clear
memory."
[Clear] [Print]
• Copying will stop and this
message will be displayed
when the memory is full.
76
Causes
You placed the originals in the
incorrect order.
Causes
You set originals in the incorrect
order.
The margin is too wide.
You placed the originals in the
wrong orientation.
Causes
The scanned original exceeds
the number of pages that can
be stored in memory.
Solutions
When placing a stack of
originals in the ADF, the last
page should be on the bottom.
If you place an original on the
exposure glass, start with the
first page to be copied.
Solutions
When setting a stack of
originals in the ADF, the last
page should be on the bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
Set a narrower margin with the
user tools. See page 92
"Duplex Margin".
Place the originals in the correct
orientation. See page 31
"Original Orientation".
Solutions
Press [Print] to copy scanned
originals and cancel the
scanning data. Press [Clear] to
cancel the scanning data and
not copy.