1. Placing Originals
4.
Enter the vertical size of the original using the number keys, and then press the [OK] key.
The "Programmed" message appears with your set original size.
When the custom size originals settings are registered,
display.
• To cancel the size you have set, press the [Reset] key.
Specifying the Original Size When the Bypass Tray is Selected
You can select either regular or custom for the size of the original when the bypass tray is selected.
Placing regular size originals
When placing regular size originals on the exposure glass or in the ADF, select the size of the originals
from the regular sizes shown on the display.
1.
Select [Byp.] using the [ ] or [ ] key, and then press the [ ] key.
2.
Select [Original Size] using the [ ] or [ ] key, and then press the [OK] key.
36
appears on the top of copy