Speaker Assembly - HP Pavilion 10 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the keyboard (see
5. Remove the base enclosure (see
6. Remove the battery (see
Remove the speaker assembly:
1. Position the top cover upside down with the speakers in front.
2. Disconnect the speaker cable from the system board (1).
3. Remove the tape that holds the speaker wires in place and carefully lift the speakers (2).
Reverse this procedure to install the speaker assembly.
Keyboard on page 25).
Base enclosure on page
Battery on page 36).
Spare part number
758646-001
28).
Component replacement procedures 39