Table of Contents
Advertisement
NOTE:
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory module (see
●
Heat sink assembly (see
To remove the system board:
1.
Position the computer upright, and then disconnect the following cables from the system board:
(1): Power connector cable
(2): Speaker cable
(3): Fan cable
(4): Display cable
2.
Remove the two Phillips PM2.5×5.0 screws (5) that secure the system board to the computer.
Memory module on page
Heat sink assembly on page
65)
61)
Component replacement procedures
57
Hide quick links:
Advertisement
Table of Contents
