Table of Contents
Advertisement
If you're using Mac OS X 10.4.x, after you connect your device, you might see a warning
message that your computer is running on UPS backup battery and that you should perform
a computer shutdown. You can ignore this message. To prevent this message from being
displayed, install the device driver using TRU-Install. For more information, see the following
sections:
•
Install Windows Device Drivers Using TRU-Install
•
Install Mac Device Drivers Using TRU-Install
Install Windows Device Drivers Using TRU-Install
TRU-Install is a feature that installs the necessary drivers the first time you connect your
hotspot to your Windows or Mac computer through the micro USB cable. An installation CD is
not required.
To install the device drivers on devices running Windows:
1.
Press and hold the Power button on the hotspot until the LCD screen lights.
2.
Attach one end of the micro-USB cable to the hotspot and plug the other end into the
USB port on your computer.
The TRU-Install screen displays.
3.
If the TRU-Install screen does not display, on your computer select Start > Computer to
view the devices connected to your computer.
4.
Double-click the TRU-Install drive, browse to the files in the TRU-Install drive, and
double-click Setup.exe.
5.
Follow the onscreen instructions.
Around Town LTE Mobile Internet
on page 22
Get Started
21
on page 21
Advertisement
Table of Contents
