Table of Contents
Advertisement
To configure the fragmentation threshold:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Wi-Fi > Options.
The WiFi Options screen displays.
6.
Scroll down to the Connection section.
7.
In the Fragmentation Threshold field, enter a fragmentation threshold value.
To prevent poor network performance, NETGEAR recommends that you keep this value
as large as possible (up to 2346).
The Submit button displays after you make a selection.
8.
Click the Submit button.
Your changes are saved.
Configure Port Forwarding
Port forwarding lets you forward incoming traffic to specific ports and devices (according to
their local IP address) on your network. (Normally, incoming traffic is blocked.) You can
enable or disable a port forwarding entry for an application.
Enable Port Forwarding for an Application
You can enable port forwarding for certain application types.
The following are some of the reasons to enable port forwarding:
Around Town LTE Mobile Internet
Advanced Settings
108
Advertisement
Table of Contents
