Table of Contents
Advertisement
Your changes are saved.
Configure the WiFi Channel
The WiFi channel is the active channel of the WiFi access point. If your network is
experiencing performance issues (possibly caused by other WiFi networks in the vicinity
using the same channel), try a different WiFi channel.
To configure the WiFi channel:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Wi-Fi > Options.
The WiFi Options screen displays.
6.
Scroll down to the Connection section.
7.
Select a WiFi channel from the Wi-Fi Channel menu.
NETGEAR recommends that you set the channel to Auto. The hotspot chooses the
channel that provides the least interference.
The Submit button displays after you make a selection.
8.
Click the Submit button.
Your changes are saved.
Configure the RTS Threshold
This setting specifies the smallest packet size, in bytes, for which RTS/CTS (Request to
Send/Clear to Send) handshaking is used. The recommended value is 2347. Change this
Around Town LTE Mobile Internet
Advanced Settings
106
Advertisement
Table of Contents
