Table of Contents
Advertisement
Configure the Connection Mode
You can set the connection mode to determine the type of WiFi devices that can connect to
your network.
To set the mode:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Wi-Fi > Options.
The WiFi Options screen displays.
6.
Scroll down to the Connection section.
7.
Select a mode from the Mode menu:
•
802.11 B
•
802.11 G
•
802.11 B/G
•
802.11 B/G/N
Note:
If you change the mode to 802.11 B/G/N and the specified Wi-Fi
security encryption type is not supported by this value, the security
encryption type might change to WPA/WPA2. For more information
about the security encryption type, see
Security Settings
The Submit button displays after you make a selection.
8.
Click the Submit button.
Around Town LTE Mobile Internet
Change the Encryption
on page 93.
Advanced Settings
105
Advertisement
Table of Contents
