Power Button
Use the Power button to power the hotspot on and off, to wake the LCD screen, and to cycle
to the next screen.
Table 1. Power button usage
Desired Result
Turn on hotspot.
Turn off hotspot.
Wake WiFi signal and
screen.
Cycle to the next screen.
LCD Screen Elements
The LCD screen displays icons, data usage, your hotspot's WiFi network name, and your
WiFi password.
Signal
strength
System alert
Number of
connected
devices
Figure 2. LCD screen
Around Town LTE Mobile Internet
Action
Press and hold the Power button until the NETGEAR AirCard
screen displays.
Press and hold the Power button for about five seconds until
the LCD screen turns off.
Press and quickly release the Power button.
Press the Power button until the desired screen displays.
Mobile broadband network
Get Started
10
Remaining battery percentage
WiFi network password
Battery
WiFi network name
Data usage