HP 350 G2 Maintenance And Service Manual page 51

●
Card reader board (See
●
Power button board (See
Remove the top cover:
1. Close the computer.
2. Turn the computer upside down with the front toward you.
3. Remove the two rubber feet (1).
NOTE: The rubber feet are included in the Rubber Kit, spare part number 746669-001.
4. Remove the ten Phillips PM2.5×6.5 screws (2) that secure the top cover to the base enclosure.
5. Remove the two Phillips PM2.0×2.0 broad head screws (1) in the optical drive bay that secure the top
cover to the base enclosure.
Card reader board on page
Power button board on page
48)
49)
Component replacement procedures 43