Top Cover - HP Compaq CQ58 Maintenance And Service Manual

Top cover

NOTE: The top cover spare part kit includes the TouchPad. However, it does not include the TouchPad
cables. The TouchPad cables are included with the TouchPad button board. For more information on the
TouchPad button board, see
Description
Top cover for use in blue HP models (includes Touchpad)
Top cover for use in black HP models (includes Touchpad)
Top cover for use in Compaq models (includes Touchpad)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Memory module/wireless module compartment cover (see
●
Hard drive (see
●
Keyboard (see
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Power button board and cable (see
●
TouchPad button board and cables (see
To remove the top cover:
1. Close the computer, and then turn the computer upside down with the front toward you.
ENWW
TouchPad button board on page
Battery on page 39), and then remove the following components:
Hard drive on page 53)
Keyboard on page 58)
Power button board on page
TouchPad button board on page
67.
WLAN module on page
65)
67)
Component replacement procedures
Spare part number
689694-001
689695-001
689696-001
48)
61