Summary of Contents for Comtrend Corporation PG-9172
Page 1
FOR PRESS USE ONLY Quick Install Guide PG-9172 | G.hn Powerline Adapter Understanding the Powerline Adapter Configuration Button (Enables Device Synchronization) Reset Button Connection Indicator Displays Connection Strength Network Indicator Displays Network Status Security Indicator Connection is Secure When Lit Initial Device Setup NOTE: A minimum of two G.hn Powerline Adapters are required to create a proper connection.
Page 2
Note: For maximum performance, please plug the Powerline Adapter directly into the wall outlet. Do not plug into a power strip or surge protector, as network performance could degrade significantly. 2. Connect the Powerline Adapter to a network device with an Ethernet (RJ-45) cable.
Page 3
Security Setup Note: G.hn Adapters will automatically connect in “non-secure” mode. It is highly recommended to follow Steps 5 and 6 to create a secure connection. 5. Press the “Config” Button for 3 seconds till you see the Security Indicator start flashing GREEN on EACH of the Powerline Adapters...
Page 4
Your device is now connected! NOTE: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage: http://us.comtrend.com/products/public/product/home-networking/pg- 9172.html For more information: Facebook: https://facebook.com/Comtrend Website: http://us.comtrend.com/ Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)