Switch Board - HP Compaq nc4000 Series Maintenance And Service Manual

Removal and Replacement Procedures

5.18 Switch Board

Switch board
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏
❏
❏
❏
2. Remove the two PM2.0×3.0 screws 1 that secure the switch
board to the system board.
3. Lift up on the middle of the switch board 2 to disconnect it
from the system board.
4. Remove the switch board.
Removing the Switch Board
Reverse the above procedure to install the switch board.
5–42
Switch Board
Spare Part Number Information
LED switch cover (Section 5.7)
Keyboard (Section 5.8)
Display assembly (Section 5.12)
Top cover (Section 5.13)
Maintenance and Service Guide
325515-001