Troubleshooting - BRP Evinrude E15D Operator's Manual

Maintenance
SYMPTOM
Starter motor will not operate
Engine will not start
Engine will not idle properly
Engine loses power
Engine runs, but makes little or
no progress
Warning system activates
46

TROUBLESHOOTING

POSSIBLE CAUSE
• Shift handle not in NEUTRAL.
• Fuse blown. Refer to
• Battery is dead.
• Not following starting instructions. Refer to
gine Starting
• Fuel tank empty.
• Fuel hose kinked.
• Fuel system contaminated with water or dirt.
• Fuel filter obstructed.
• Throttle not at IDLE. Return throttle to IDLE.
• Spark plugs incorrect. Refer to
page 44.
• Spark plugs improperly gapped, carboned,
burned, or wet.
• Fuse blown. Refer to
• Flashing "Water Temp" or hot light, refer to
gine Monitoring
heating
• Flashing "Check Engine" or "Chk Eng" light, refer
to
Engine Monitoring
• Debris on propeller.
• Spark plugs damaged or incorrect. Refer to
Spark Plugs
• Fuel system contaminated with water or dirt.
• Spark plugs damaged or incorrect. Refer to
Spark Plugs
• Fuel filter obstructed.
• Fuel system contaminated with water or dirt.
• Water intakes obstructed and cooling system not
operating correctly. Refer to
on page 36.
• Oiling system malfunction.
• S.A.F.E. protection mode activated. Refer to
gine Monitoring
• Propeller hub loose, slipping.
• Propeller blades bent or missing.
• Propeller shaft bent.
• Propeller debris.
• Refer to
Fuse
on page 20.
Fuse
on page 34 and
on page 36.
on page 34.
on page 44.
on page 44.
on page 34.
Engine Monitoring
on page 31.
En-
Spark Plugs
on page 31.
En-
Engine Over-
Engine Overheating
En-
on page 34.
on