Table of Contents
Advertisement
OUTBOARD EXTERNAL FINISH
Periodically, wash the entire boat and out-
board with soapy water and apply a coat of
automotive wax. Leave the engine cover in
place when washing the outboard.
IMPORTANT: When trailering your outboard,
DO NOT cover the engine with canvas—it
will dull the finish of the outboard's engine
covers.
SCRATCH REPAIR
Surface scratches on the upper and lower
engine covers can be painted.
IMPORTANT: Your Dealer has the profes-
sional materials and matching paint colors to
properly repair scratches. See your Dealer to
repair any deep scratches or gouges.
HULL FINISH
The condition of your boat's bottom affects
performance. Marine growth or bottom paint-
ing may reduce speed and fuel efficiency.
For maximum performance, keep the boat's
running surface clean by rinsing it with fresh
water and wiping it dry. Apply Evinrude anti-
corrosion spray to any surface subject to cor-
rosion, but avoid the anti-corrosion anode(s).
SUBMERGED OUTBOARD
If your outboard has been under water, have
it serviced immediately upon recovery. If
immediate service is unavailable, resub-
merge it in fresh water to avoid prolonged ex-
posure to the atmosphere.
After submersion, all boat and engine electri-
cal, fuel, and oiling systems must be inspect-
ed for signs of water intrusion. Your Dealer
should perform this service.
S
TORAGE
45
Hide quick links:
Advertisement
Table of Contents
