Maintenance Schedule - BRP Evinrude E15D Operator's Manual

Hide thumbs Also See for Evinrude E15D:

User manual (72 pages)

Table Of Contents

Table of Contents

Routine inspection and maintenance is nec-

essary to prolong outboard life. The following

chart provides guidelines for inspection and

maintenance to be performed by an autho-

rized Dealer.

Description

Electrical and ignition wires, inspect for wear or chafing

Engine to transom mounting hardware, re-torque (40 ft. lbs.)

Fasteners, inspect any loosened components

Fuel and oil system components, inspect and repair leaks

Fuel filter, replace

Gearcase lubricant, replace

Grease fittings, lubricate

Power trim/tilt system and fluid level, inspect

Propeller shaft splines, inspect and lubricate

Spark plugs, inspect and replace if necessary

Starter pinion shaft, inspect and lubricate

Steering system, inspect and lubricate

Thermostats, inspect

Throttle cable, inspect and re-tension

Water pump, inspect or replace if necessary

(1) Average recreational use. Commercial use, heavy use, or use in salt or polluted water requires more

frequent inspection and maintenance (annual checks are recommended).

(2) Emission-related component – Refer to Owner Responsibility on page 38, Product Warranty

Information on page 55 and, if applicable, California Emission Control Warranty Statement on

page 58

(3) Annually in salt water applications – Refer to Salt Water Lubrication Points on page 30

A. HPF XR Gearcase Lubricant

HPF Pro Gearcase Lubricant in high performance or commercial applications

B. Power Trim/Tilt and Power Steering Fluid

C. Triple-Guard Grease

D. Starter Bendix Lube ONLY, P/N 337016