Table of Contents
Advertisement
To run Battery Check:
1.
Connect the AC adapter to the computer.
NOTE:
properly.
2.
Select Start > Help and Support > Troubleshoot: Diagnostics > Power, Thermal and
Mechanical > Power > Battery Check.
Battery Check examines the battery and its cells to see if they are functioning properly, and then
reports the results of the examination.
Displaying the remaining battery charge
▲
Move the pointer over the battery meter icon in the notification area, at the far right of the
taskbar.
Inserting or removing the battery
CAUTION:
prevent loss of information, save your work, and initiate Hibernation or shut down the computer
through Windows before removing the battery.
To insert the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Insert the battery into the battery bay (1) until it is seated.
The battery release latch (2) automatically locks the battery into place.
66
Chapter 5 Power management
Downloaded from LpManual.com Manuals
The computer must be connected to external power for Battery Check to function
Removing a battery that is the sole power source can cause loss of information. To
Advertisement
Table of Contents
Troubleshooting
