Memory Modules - HP EliteBook 8530p Maintenance And Service Manual

Memory modules

Description
1-GB (PC2-6400, 800-MHz, DDR2)
2-GB (PC2-6400, 800-MHz, DDR2)
4-GB (PC2-6400, 800-MHz, DDR2)
Before removing the expansion memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the expansion memory module:
1. Position the computer upside-down with the front toward you.
2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module
compartment cover to the computer.
3. Lift the right side of the cover (2), swing it up and to the left, and remove the cover. The memory
module compartment cover is included in the Plastics Kit, spare part number 495076-001.
4. Spread the retaining tabs (1) on each side of the expansion memory module slot to release the
memory module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page 43).
Spare part number
495052-001
495053-001
495054-001
Component replacement procedures 55