Usb/Audio Board - HP EliteBook 8530p Maintenance And Service Manual

4. Remove the ExpressCard assembly (2).
Reverse this procedure to install the ExpressCard assembly.

USB/audio board

Description
USB/audio board (includes USB cable and audio cable)
Before removing the USB/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
f. Top cover (see
g. Fan (see
h. Heat sink (see
92 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Display assembly on page
Top cover on page
Fan on page 78)
Heat sink on page
43).
49)
45)
59)
64)
67)
73)
80)
Spare part number
495065-001