Managing Ports; Setting Operation Parameters For A Port - HP 1920 Gigabit Ethernet Switch Series User Manual

Managing ports

You can use the port management feature to set and view the operation parameters of a Layer 2 Ethernet
port and an aggregate interface.
• For a Layer 2 Ethernet port, these operation parameters include its state, speed, duplex mode, link
type, PVID, description, MDI mode, flow control settings, MAC learning limit, and storm
suppression ratios.
For an aggregate interface, these operation parameters include its state, link type, PVID, description,
•
and MAC learning limit.

Setting operation parameters for a port

1. Select Device > Port Management from the navigation tree.
2. Click the Setup tab.
69